|Size (L x W x H)||485 mm x 465 mm x 45 mm|
Suitable for professional live sound reinforcement or fixed installations, the top of the range 4-channel DP-4120 delivers extreme power from a light weight design.
DP series are also stable all the way down to 2Ω. This means they will drive multiple 8Ω or 16Ω loudspeakers.
Front panel LEDs also keep the sound engineer well informed with fault, peak and signal LEDs.
The variable speed fans keep the amplifier rack quiet when not in use - and cool while its running at high volume.
Mono mode saves external cabling by splitting a single input to feed both channels of the amplifier.
In addition, gains can easily be controlled by the rear panel gain switch. This allows for installation into almost any rig or venue.
The DP-4120 features XLR inputs with a maximum input level of +22dBu allowing for integration with any typical professional audio system.
Lightweight, powerful and portable. Its that simple!
DP series amplifiers are stable all the way down to 2Ω allowing for daisy-chaining of 8Ω or 16Ω loudspeakers.
|Output power 8Ω||4 x 1200w|
|Output power 4Ω||4 x 2040w|
|Bridged mono output 16Ω||2 x 2400w|
|Output power 2Ω||4 x 3468w|
|Bridged mono output 8Ω||2 x 4080w|
|Bridged mono output 4Ω||2 x 6936w|
|Input sensitivity & Impedance|
|Balanced XLR input||20KΩ|
|Max input level||15dBu (4.3Vrms)|
|Slew rate||>50V / μs|
|+/-1dB @ 8Ω||20Hz - 20kHz|
|+/-3dB @ 8Ω||20Hz - 30kHz|
|Signal input||Female XLR jacks|
|Power output||speakON compatible|
|Front panel||AC Switch, 4 x channel gain knobs|
|Rear panel||Parallel, Stereo & Bridge mode switch, Limiter switch|
|Protections||Thermal, Over-current, Output DC, Output short protect.|
|Indicators||Power, Protect, Signal, Limiter|
|Cooling||Variable speed fan|
|AC Power||90 ~ 260VAC, 50 ~ 60Hz|
|Dimensions||45 * 485 * 465mm|